Oricom UHF380 CB with control speaker mic

UHF380.jpg
UHF380.jpg

Oricom UHF380 CB with control speaker mic

319.00

Compact UHF CB with Controller Speaker Microphone

Key Features
• 80 Narrowband channels*
• 5 watts (max TX power)
• Heavy duty controller speaker microphone
• Ultra compact transceiver
• Rotary volume & channel knob
• Wide band scanner (400 – 512MHz)
• 8500+ Receive frequencies
• 200 programmable receive only channels
• 5 Digit Selcall ID with alpha display
• CTCSS and DCS
• Tri colour backlit LCD display (Amber/Red/Green)
• Duplex (range extender)
• Open/Priority and Instant Channel Scan
• Digital squelch control
• Busy channel lockout
• Rugged chassis construction with integrated heat sink

*This 80 channel narrowband radio has a total of 75 useable voice channels Channels 22 and 23 are used for Telemetry and Telecommand, voice communications are not allowed on these channels.Channels 61,62 and 63 are guard channels and are not available for use.  

Compliance

AS/NZS 4365:2011

Frequency Range TX

476.425 - 477.4125 MHz

Frequency Range RX

400 - 512MHz

Number of TX/RX Channels

80 UHF CB

Number of user programmable RX only Channels

200

Channel Spacing TX/RX

12.5KHz

Wide Band Scanner

400~512, 400~420, 420~450, 450~470, 470~512 MHz

Operating modes

Simplex, Repeater TX offset (+750kHz)

Selcall ID

5 Digit with alpha display

Scanning Speed

130 msec per channel

Antenna Impeadance

50 Ohms

Operating Volts nominal

13.8 VDC

Operating Volts Range

10 to 15 VDC

Over Voltage Protection

Diode and voltage regulator

Over Current Protection

2 Amp fuse

Reverse Polarity Protection

Shunt diode

Frequency Stability

+/- 5ppm

Transmitter

 

RF Output Power

Nominal 5watts

Modulation

F3E (FM)

Maximum Deviation

2.5kHz

Spurious Emissions

< -30 dBm

TX Audio pre-emphasis

+ 6dB/octave from 300Hz to 3kHz

Current Consumption during TX

1.6 Amps with 50 Ohm antenna termination

Reciever

 

Circuit Type

Dual conversion superheterodyne

IF Frequencies

1st IF = 21.4MHz , 2nd IF = 450kHz

Current Consumption during RX

200mA

Sensitivity

< -123dBm at 12dB SINAD

Sensitivity Receive only channels

< -110dBm for 12dB SINAD

Selectivity

+/-3.75kHz min @ 3dB to +/-15kHz max @ 40dB

Intermodulation Immunity

> 70dB

Spurious Immunity

> 70dB

Audio Output Power

3 Watts Maximum

RX Audio de-emphasis

-6dB/octave 300Hz to 3kHz

Audio frequency response

300Hz to 3kHz

External speaker jacks

One on transceiver one on head unit for optional 8 Ohm mono speaker (3.5mm jack.)

Transciever

 

Dimensions

135 (d) x 110 (w) x 29 (h) mm

Weight

420g

 

 


 

 

 

 

 

 

Add To Cart

The UHF180 5 watt UHF CB is a remote head unit that is so trim that it can easily be attached to the most cluttered dashboard. Its compact transceiver is robust and can be easily installed in tight spaces. The external heat-sink cools quickly, ensuring the radio maintains the highest possible output power

Key Features

• 5 watts (max TX power)

• 80 Narrowband Channels

• Ultra compact remote head and transceiver

• Heavy duty microphone with volume and channel control

• Wideband scanner (400 – 512MHz)

• 8500+ Receive frequencies

• 200 user programmable receive only channels

• 5 Digit Selcall ID with alpha display

• 38 CTCSS and 104 DCS Codes

• Tri colour backlit LCD display (Amber/Red/Green)

• Duplex (range extender)

• Open/Group/Priority Scan

• Priority channel

• Large easy to read LCD display

• Rotary channel select

• Digital squelch control

• Busy channel lockout

• Rugged chassis construction with external heat sink

• 3.5mm external speaker connections

(external speaker not supplied)

• Requires external antenna (not supplied)

 

Pack Includes

• In-vehicle UHF CB Radio transceiver

• Remote head unit with 1.9m cable

• Microphone plus microphone hanger

• Power cable with in-line fuse

• Extension cable for mic

• 2 mounting brackets and fittings